2mm 2.5mm 5mm 8mm 10mm 15mm thick pure 1100 aluminum sheet metal coil price

1: Brief Introduction Of 1100 aluminum 1100 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically strongest alloy in the series, and is the only 10

Featured Products

2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices
2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices
1: Brief Introduction Of 1100 aluminum 

1100 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically strongest alloy in the series, and is the only 1000-series alloy commonly used in rivets. At the same time, it keeps the benefits of being relatively lightly alloyed (compared to other series), such as high electrical conductivity, thermal conductivity, corrosion resistance, and workability. It can be strengthened by cold working, but not by heat treatment.
Machinability:
Aluminium/Aluminum 1100 alloy has excellent machinability especially when the alloy is machined in hard temper. Carbide tooling is suitable, but high speed steel tooling can also be used. In cases where heavy cuts are required, an oil lubricant must be used.
Forming:
Both hot and cold forming is easy to perform with Aluminium/Aluminum 1100 alloy. This alloy can be cold worked extensively in the annealed condition without the need for intermediate annealing.
Welding:
Welding can be easily performed using all the conventional methods. It is suitable to use AL 1100 consumable electrodes and filler wire for the process.
Heat Treatment:
Aluminium/Aluminum 1100 alloy cannot be successfully heat treated other than to produce the annealed form and 'O' temper.
Forging:
Aluminium/Aluminum 1100 alloy can be hot forged without much difficulty.
Hot Working:
Hot working can be easily performed on Aluminium/Aluminum 1100 alloy.
Cold Working:
Aluminium/Aluminum 1100 alloy is best suited for cold working as it has good ductility in the annealed temper condition. It can also be cold formed by bending, drawing or spinning.
Annealing:
After Aluminium/Aluminum 1100 alloy is extensively cold worked, annealing is required and can be performed at 343°C (650°F) for a suitable amount of time so as to ensure thorough heating and then it can be air cooled.
Hardening:
Aluminium/Aluminum 1100 alloy can be hardened by cold working only.
Applications:
Aluminium/Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and name plates, decorative parts, giftware, cooking utensils, rivets and reflectors, and in sheet metal work.

2: Chemical Composition  
2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices
Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
                    5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091

Aluminum Temper:
O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,T8511,T4511,T52,T5511,T6511,T54,T73


The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum alloys.  The first digit indicates the major alloying element.  The second digit indicates whether there was a modification in the basic alloy.  The third and fourth digit indicates the specific alloy.  The following represent the various groups:
1XXXAluminum 99% or greater
2XXXCopper - major alloying element
3XXXManganese - major alloying element
5XXXMagnesium - major alloying element
6XXXMagnesium and silicon - major alloying elements
7XXXZinc -major alloying element
3: Aluminum Plate/Coil/Flat Sheet Process 
2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices

4: Aluminum Alloy Plate/Flat Sheet Package 
2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices

5: About us 
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on . 
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners. 
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!

6: Why choose us 
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.


7: Contact Us
2mm 2.5mm 5mm 8mm 10mm 15mm Thick Pure 1100 Aluminum Sheet Metal Roll Prices

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours