Painted aluminum alloy sealing plate 8011 supplier

Product Description Lacqured aluminum bottle Closure Sheets 8011 OSpecification Aluminum Closure sheet Dimensions                                              

Featured Products

Product Description

Lacqured aluminum bottle Closure Sheets 8011 O

Specification
 
Aluminum Closure sheet Dimensions                                                                 
ParameterRangeStandardTolerance
Thickness (mm)0.18 _ 0.250.18, 0.20+0.005/-0.005
Width (mm)50 _ 1250813, 845, 833.8, 835+0.5, -0
Length (mm)400 _ 1000655, 706+0.5, -0
Diagonal difference for sheet (mm)1  max--
Coil sizes (mm)OD: 1450 max
ID: 75, 150, 300, 508
--
Coil density (kg/mm)3.5 max--
Offer for thickness and width outside the range may be quoted on specific request

Lacqured Aluminum Alloy Closure Sheets 8011 Supplier
Lacqured Aluminum Alloy Closure Sheets 8011 Supplier
 
Earing                                                                                              
Typical value: < 2 per cent for > =0.18 mm thickness
 
Aluminum Closure Sheet Mechanical properties                                                       
Alloy (AA)TemperUTS (mpa)% E (min)
(at 50 mm gauge length)
MinMax
3105H141502001
8011O8.51215
H141251701
H241251601
 
Lacqured Aluminum Alloy Closure Sheets 8011 Supplier
Lacqured Aluminum Alloy Closure Sheets 8011 Supplier

Chemical composition of Aluminum Closure Sheets
Aluminum Sheet Chemical composition                                                               
Alloy (%)AA 3105AA 8011
Fe0.700.6 _ 1.0
Si0.600.5 _ 0.9
Mg0.20 _ 0.800.05
Mn0.3 _ 0.80.20
Cu0.300.10
Zn0.250.10
Ti0.100.08
Cr0.100.05
Each (others)0.050.05
Total (others)0.150.15
AlRemainingRemaining
Single number indicates maximum content
 
The package of Aluminum Closure Sheets
 
Aluminum Closure Sheet Packing
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.
Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets.
Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection.

Lacqured Aluminum Alloy Closure Sheets 8011 Supplier

Lacqured Aluminum Alloy Closure Sheets 8011 Supplier
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours